Series III Legacy HPLC Pump

This is a Legacy product and has been discontinued.
However, Scientific Systems will contintue to provide spare parts and service.

Series III Isocratic Pump for Advanced Applications

The compact and versatile Series III Pump delivers the precision, performance and reliability of more expensive pumps at a fraction of the price.
The Series III pump consists of a series of modular subassemblies packaged to meet any isocratic application requirements. The extensive use of digital logic and a micro-stepped motor allow for precise and flexible control. The user interface consists of an LED display and keypad.
The self-flush head and a three-year warranty ensure years of trouble-free service. Method development is easy with Autoprime™ purging. Upper and lower pressure limits can be easily set, and the pressure can be monitored on the LED display. External control gives flexible performance at an affordable price.
When combined with the 1200 Detector and an injector, you have an economical and versatile Isocratic System.

Meets the Most Demanding Applications

The patented low dead volume pulse dampener and rapid refill in the Series III make this single-piston pump virtually pulse-free. It meets the requirements of the most demanding detectors.

Analytical and Semi-Prep Separations

Flow rates from .001-5 mL/min., 0.01-10 mL/min., and 0.1-40 mL/min. are available.

Material Compatibility for All Applications

The Series III is available in either traditional 316 stainless steel or biocompatible PEEK™ (polyetherether ketone) for metal-sensitive applications.

Reduced Maintenance

Seal life is dramatically extended by actively flushing the back of the primary seal with a flushing solution. The result is less down-time and reduced operating expenses. The self-flush is automatic; just change the flushing fluid weekly. Seals can be changed in five minutes without tools.

Easy Solvent Changes

Autoprime™ one-button purging makes it easy to prime or purge the pump.

Works in Your Existing System

The Series III is a direct replacement for many pumps, including Waters, Shimadzu, and other leading brands.

Performance and Reliability Beyond its Price

The use of digital stepper motor technology and the proven singlepiston design gives the performance of the most expensive pumps at a fraction of their cost. The operating cost is lower too, due to the simplicity of the design and fewer number of parts required. It’s so reliable it carries a three-year warranty.

Series III Pump Specifications

Flow Rates:
0.001-5 mL/min., 0.01-10 mL/min., 0.1 – 40.0 mL/min
Pressure:
0 to 6,000 psi (5 mL or 10 mL, Stainless Steel)
0 to 5,000 psi (5 mL or 10 mL, PEEK)
0 to 1,600 psi (40 mL Stainless Steel or PEEK)
Pressure Accuracy:
±2% of full-scale pressure
Flow Precision:
0.2% RSD
Features
Prime-Purge Valve
Pulse Dampener
Self-Flushing Pump Head
LED Display
Remote Inputs
RS-232
Frequency (0-10 kHz), Enable Run/Stop Voltage (0-10 Volts)
Dimensions:
5.5” H x 10” W x 17” D (14 x 25.4 x 43.2 cm)
Weight:
24 pounds (11 kg)
Power:
100/110 Volts AC; 220 Volts AC; 50/60 Hz

Replacement Parts List

Series III, 10 mL, Stainless Steel

  • 880203 10 mL/min Aqueous Seal Kit
  • 880204 10 mL/min Organic Seal Kit
  • 880401 Check Valve Kit
  • 880701 Replacement Outlet Filter Element
  • 880721 Replacement Inlet Filter Elements (2)
  • 880651 Prime Purge Valve Rebuild Kit
  • 880603 Pulse Damper Rebuild Kit
  • 880334 Head & S/F Kit, 10mL
  • 880354 Series II-IV Piston, 10mL
  • 880414 Self-Flush Check Valve Kit
  • 880611 Replacement Pulse Damper
  • 880503 Series II-IV Drive Assembly
  • 880132 Series III SMT Board Set (Pump Serial # > 20,000)
  • 880103 Series III Board Set (Pump Serial # < 20,000)
  • 880122 Front Panel Assembly
  • 880904 Series III Overlay

10mL Stainless Steel Series III Replacement Parts List

Series III, 40 mL, Stainless Steel

  • 880205 40 mL/min Aqueous Seal Kit
  • 880206 40 mL/min Organic Seal Kit
  • 880401 Check Valve Kit
  • 880701 Replacement Outlet Filter Element
  • 880721 Replacement Inlet Filter Elements (2)
  • 880651 Prime Purge Valve Rebuild Kit
  • 880603 Pulse Damper Rebuild Kit
  • 880336 Head & S/F Kit, 40mL
  • 880355 Series II-IV Piston, 40mL
  • 880414 Self-Flush Check Valve Kit
  • 880611 Replacement Pulse Damper
  • 880503 Series II-IV Drive Assembly
  • 880132 Series III SMT Board Set (Pump Serial # > 20,000)
  • 880103 Series III Board Set (Pump Serial # < 20,000)
  • 880122 Front Panel Assembly
  • 880904 Series III Overlay

40mL Stainless Steel Series III Replacement Parts List

Series III, 10 mL, PEEK

  • 880203 10 mL/min Aqueous Seal Kit
  • 880204 10 mL/min Organic Seal Kit
  • 880402 Check Valve Kit
  • 880711 Replacement Outlet Filter Element
  • 880721 Replacement Inlet Filter Elements (2)
  • 880652 Prime Purge Valve Rebuild Kit
  • 880603 Pulse Damper Rebuild Kit
  • 880333 Head & S/F Kit, 10mL
  • 880354 Series II-IV Piston, 10mL
  • 880414 Self-Flush Check Valve Kit
  • 880612 Replacement Pulse Damper
  • 880503 Series II-IV Drive Assembly
  • 880132 Series III SMT Board Set (Pump Serial # > 20,000)
  • 880103 Series III Board Set (Pump Serial # < 20,000)
  • 880122 Front Panel Assembly
  • 880904 Series III Overlay

10mL PEEK Series III Replacement Parts List

Series III, 40 mL, PEEK

  • 880205 40 mL/min Aqueous Seal Kit
  • 880206 40 mL/min Organic Seal Kit
  • 880402 Check Valve Kit
  • 880711 Replacement Outlet Filter Element
  • 880721 Replacement Inlet Filter Elements (2)
  • 880652 Prime Purge Valve Rebuild Kit
  • 880603 Pulse Damper Rebuild Kit
  • 880335 Head & S/F Kit, 40mL
  • 880355 Series II-IV Piston, 40mL
  • 880414 Self-Flush Check Valve Kit
  • 880612 Replacement Pulse Damper
  • 880503 Series II-IV Drive Assembly
  • 880132 Series III SMT Board Set (Pump Serial # > 20,000)
  • 880103 Series III Board Set (Pump Serial # < 20,000)
  • 880122 Front Panel Assembly
  • 880904 Series III Overlay

40mL PEEK Series III Replacement Parts List